FIRMM - Revision history

Melodie: /* XA30 */

2023-08-24T17:21:56Z

XA30

← Older revision		Revision as of 17:21, 24 August 2023
Line 7:		Line 7:
	*FIRMM on XA30 is seamlessly integrated and starts automatically via settings in the bold, diffusion, and vNav sequences. No user input is necessary.		*FIRMM on XA30 is seamlessly integrated and starts automatically via settings in the bold, diffusion, and vNav sequences. No user input is necessary.
	*If your project would like to utilize FIRMM, please reach out to CCN techs.		*If your project would like to utilize FIRMM, please reach out to CCN techs.
			*Of note, there is a bug whereby using FIRMM disables the automatic copy reference feature. As the scan runs, you will be forced to double-click each referenced sequence to reopen it and re-apply the prescription before it will start. This can be done, but may introduce small differences in the FoV in your final data set. It is up to you to decide if the FIRMM/copy-reference tradeoff is worthwhile for your study.
			** As of August 2023, this is a known issue with Siemens workstations and Siemens is working on the problem.
	[[File:FirmmTablet.png\| 400px \| thumb \| FIRMM Tablet Start Screen ]]		[[File:FirmmTablet.png\| 400px \| thumb \| FIRMM Tablet Start Screen ]]

Jaredgil: /* XA30 */

2023-06-23T19:36:59Z

XA30

← Older revision		Revision as of 19:36, 23 June 2023
Line 6:		Line 6:
	==XA30==		==XA30==
	*FIRMM on XA30 is seamlessly integrated and starts automatically via settings in the bold, diffusion, and vNav sequences. No user input is necessary.		*FIRMM on XA30 is seamlessly integrated and starts automatically via settings in the bold, diffusion, and vNav sequences. No user input is necessary.
	*If your project would like to utilize FIRMM, please reach out to CCN techs.		*If your project would like to utilize FIRMM, please reach out to CCN techs.
			[[File:FirmmTablet.png\| 400px \| thumb \| FIRMM Tablet Start Screen ]]

	==VE11C - ARCHIVED==		==VE11C - ARCHIVED==

Jaredgil: /* Tablet FIRMM */

2023-06-06T21:23:20Z

Tablet FIRMM

← Older revision		Revision as of 21:23, 6 June 2023
Line 2:		Line 2:
	*[https://nousimaging.com/solutions/ Product Site]		*[https://nousimaging.com/solutions/ Product Site]
	=Tablet FIRMM=		=Tablet FIRMM=
	'''FIRMM can track bold EPI, Diffusion, and volume navigator (vNav) T1 and T2 sequences.'''~~<br />'''Make sure Advanced User mode is enabled -''' You will know it~~ is if the ~~MARS_SSH shortcut~~ is ~~visible on the start menu~~.		'''FIRMM can track bold EPI, Diffusion, and volume navigator (vNav) T1 and T2 sequences.'''

			==XA30==
			*FIRMM on XA30 is seamlessly integrated and starts automatically via settings in the bold, diffusion, and vNav sequences. No user input is necessary.
			*If your project would like to utilize FIRMM, please reach out to CCN techs.

			==VE11C - ARCHIVED==
	*Register a subject on the scanner (normal procedure).		*Register a subject on the scanner (normal procedure).
	*Check the threshold value on the tablet (the dotted lines above and below the 0 line) and change the value under the Settings tab if desired.		*Check the threshold value on the tablet (the dotted lines above and below the 0 line) and change the value under the Settings tab if desired.

Jaredgil: /* Tablet FIRMM */

2022-11-04T19:08:48Z

Tablet FIRMM

← Older revision		Revision as of 19:08, 4 November 2022
Line 2:		Line 2:
	*[https://nousimaging.com/solutions/ Product Site]		*[https://nousimaging.com/solutions/ Product Site]
	=Tablet FIRMM=		=Tablet FIRMM=
	'''FIRMM can track bold EPI and volume navigator (vNav) T1 and T2 sequences ~~(DTI coming soon)~~.'''<br />'''Make sure Advanced User mode is enabled -''' You will know it is if the MARS_SSH shortcut is visible on the start menu.		'''FIRMM can track bold EPI, Diffusion, and volume navigator (vNav) T1 and T2 sequences.'''<br />'''Make sure Advanced User mode is enabled -''' You will know it is if the MARS_SSH shortcut is visible on the start menu.
	*Register a subject on the scanner (normal procedure).		*Register a subject on the scanner (normal procedure).
	*Check the threshold value on the tablet (the dotted lines above and below the 0 line) and change the value under the Settings tab if desired.		*Check the threshold value on the tablet (the dotted lines above and below the 0 line) and change the value under the Settings tab if desired.
Line 9:		Line 9:
	**A pop-up will appear asking whether this file is secure, select 'Run'.		**A pop-up will appear asking whether this file is secure, select 'Run'.
	*A new pop-up will appear that has a large 'CONNECTED' message.		*A new pop-up will appear that has a large 'CONNECTED' message.
	*Start your scan and participant motion metrics will appear on the FMRI ~~and~~ T1/T2 tabs (if using vNav structural).		*Start your scan and participant motion metrics will appear on the FMRI, DWI, or T1/T2 tabs (if using vNav structural).
	*Note that the percentage reflects the aggregate motion metrics up to the current moment. If you're looking for the percentage that corresponds to only a particular series, tap "Show Series" and make sure only the one you're interested in is checked.		*Note that the percentage reflects the aggregate motion metrics up to the current moment. If you're looking for the percentage that corresponds to only a particular series, tap "Show Series" and make sure only the one you're interested in is checked.
	*No need to take any further action when your scan is complete. If the next group intends to collect FIRMM data, they will start the process again (register patient, right click "FIRMM start one patient", etc.) and the tablet will automatically sync with the new functionals as they are acquired.		*No need to take any further action when your scan is complete. If the next group intends to collect FIRMM data, they will start the process again (register patient, right click "FIRMM start one patient", etc.) and the tablet will automatically sync with the new functionals as they are acquired.

Jaredgil: /* Research FIRMM */

2022-11-04T19:06:57Z

Research FIRMM

← Older revision		Revision as of 19:06, 4 November 2022
Line 13:		Line 13:
	*No need to take any further action when your scan is complete. If the next group intends to collect FIRMM data, they will start the process again (register patient, right click "FIRMM start one patient", etc.) and the tablet will automatically sync with the new functionals as they are acquired.		*No need to take any further action when your scan is complete. If the next group intends to collect FIRMM data, they will start the process again (register patient, right click "FIRMM start one patient", etc.) and the tablet will automatically sync with the new functionals as they are acquired.

	=Research FIRMM=		=Research FIRMM (decommissioned)=
	'''Make sure Advanced User mode is enabled''' - You will know it is if the MARS_SSH shortcut is visible on the start menu.		'''Make sure Advanced User mode is enabled''' - You will know it is if the MARS_SSH shortcut is visible on the start menu.

Melodie at 21:45, 2 September 2022

2022-09-02T21:45:05Z

← Older revision		Revision as of 21:45, 2 September 2022
Line 3:		Line 3:
	=Tablet FIRMM=		=Tablet FIRMM=
	'''FIRMM can track bold EPI and volume navigator (vNav) T1 and T2 sequences (DTI coming soon).'''<br />'''Make sure Advanced User mode is enabled -''' You will know it is if the MARS_SSH shortcut is visible on the start menu.		'''FIRMM can track bold EPI and volume navigator (vNav) T1 and T2 sequences (DTI coming soon).'''<br />'''Make sure Advanced User mode is enabled -''' You will know it is if the MARS_SSH shortcut is visible on the start menu.
	*Register a subject on the scanner (normal procedure).		*Register a subject on the scanner (normal procedure).
			*Check the threshold value on the tablet (the dotted lines above and below the 0 line) and change the value under the Settings tab if desired.
	*Open up the Windows start menu (CTRL+ESC).		*Open up the Windows start menu (CTRL+ESC).
	*Right click on the 'FIRMM start one patient' towards the top of the menu and click open.		*Right click on the 'FIRMM start one patient' towards the top of the menu and click open.
Line 9:		Line 10:
	*A new pop-up will appear that has a large 'CONNECTED' message.		*A new pop-up will appear that has a large 'CONNECTED' message.
	*Start your scan and participant motion metrics will appear on the FMRI and T1/T2 tabs (if using vNav structural).		*Start your scan and participant motion metrics will appear on the FMRI and T1/T2 tabs (if using vNav structural).
			*Note that the percentage reflects the aggregate motion metrics up to the current moment. If you're looking for the percentage that corresponds to only a particular series, tap "Show Series" and make sure only the one you're interested in is checked.
			*No need to take any further action when your scan is complete. If the next group intends to collect FIRMM data, they will start the process again (register patient, right click "FIRMM start one patient", etc.) and the tablet will automatically sync with the new functionals as they are acquired.

	=Research FIRMM=		=Research FIRMM=
Line 23:		Line 26:
	#Terminal should start spitting out lines, X11 should open up and you should see a message on the terminal window that says "Waiting for DICOMs..."		#Terminal should start spitting out lines, X11 should open up and you should see a message on the terminal window that says "Waiting for DICOMs..."
	#Click on the Start button on the X11 FIRMM application window.		#Click on the Start button on the X11 FIRMM application window.
	#When your functional scan starts, volumes should start appearing after ~45sec delay		#When your functional scan starts, volumes should start appearing after ~45sec delay.

Melodie at 21:36, 2 September 2022

2022-09-02T21:36:43Z

← Older revision		Revision as of 21:36, 2 September 2022
Line 4:		Line 4:
	'''FIRMM can track bold EPI and volume navigator (vNav) T1 and T2 sequences (DTI coming soon).'''<br />'''Make sure Advanced User mode is enabled -''' You will know it is if the MARS_SSH shortcut is visible on the start menu.		'''FIRMM can track bold EPI and volume navigator (vNav) T1 and T2 sequences (DTI coming soon).'''<br />'''Make sure Advanced User mode is enabled -''' You will know it is if the MARS_SSH shortcut is visible on the start menu.
	*Register a subject on the scanner (normal procedure).		*Register a subject on the scanner (normal procedure).
	*Open up the ~~windows starts~~ menu (CTRL-ESC).		*Open up the Windows start menu (CTRL+ESC).
	*Right click on the 'FIRMM start one patient' towards the top of the menu and click open.		*Right click on the 'FIRMM start one patient' towards the top of the menu and click open.
	**A pop-up will appear asking whether this file is secure, select 'Run'.		**A pop-up will appear asking whether this file is secure, select 'Run'.
Line 14:		Line 14:

	FIRMM Instructions:		FIRMM Instructions:
	#Press ~~ctrl-esc~~ on console --> STOP FIRMM Session		#Press CTRL+ESC on console --> STOP FIRMM Session
	#Register your participant		#Register your participant.
	#Press ~~ctrl-esc~~ on console --> START FIRMM Session		#Press CTRL+ESC on console --> START FIRMM Session
	#Close out of terminal and X11 on iMac		#Close out of terminal and X11 on the iMac.
	#* Go to "XQuartz" or "Terminal" menu at the top left of the screen, then scroll down and click "Quit"		#* Go to "XQuartz" or "Terminal" menu at the top left of the screen, then scroll down and click "Quit"
	#Double click "FIRMM.command" icon on desktop~~, this~~ should open up terminal		#Double click "FIRMM.command" icon on desktop. This should open up the terminal.
	#Type FIRMM into command line and press ~~enter~~		#Type FIRMM into command line and press Enter.
	#Terminal should start spitting out lines, X11 should open up and you should see a message on the terminal window that says "~~waiting~~ for ~~dicoms~~..."		#Terminal should start spitting out lines, X11 should open up and you should see a message on the terminal window that says "Waiting for DICOMs..."
	#Click on the Start button on the X11 FIRMM application window~~, start~~ your functional scan		#Click on the Start button on the X11 FIRMM application window.
	~~#Volumes~~ should start appearing after ~45sec delay		#When your functional scan starts, volumes should start appearing after ~45sec delay

Jaredgil at 21:10, 26 August 2022

2022-08-26T21:10:33Z

← Older revision		Revision as of 21:10, 26 August 2022
Line 2:		Line 2:
	*[https://nousimaging.com/solutions/ Product Site]		*[https://nousimaging.com/solutions/ Product Site]
	=Tablet FIRMM=		=Tablet FIRMM=
	'''FIRMM ~~only tracks~~ bold EPI and volume navigator (vNav) T1 and T2 sequences.'''		'''FIRMM can track bold EPI and volume navigator (vNav) T1 and T2 sequences (DTI coming soon).'''<br />'''Make sure Advanced User mode is enabled -''' You will know it is if the MARS_SSH shortcut is visible on the start menu.
	*Register a subject on the scanner (normal procedure).		*Register a subject on the scanner (normal procedure).
	*Open up the windows starts menu (CTRL-ESC).		*Open up the windows starts menu (CTRL-ESC).
Line 11:		Line 11:

	=Research FIRMM=		=Research FIRMM=
	'''Make sure Advanced User mode is enabled''' - You will know it is if the MARS_SSH shortcut is visible on the start menu		'''Make sure Advanced User mode is enabled''' - You will know it is if the MARS_SSH shortcut is visible on the start menu.

	FIRMM Instructions:		FIRMM Instructions:

Jaredgil at 21:06, 26 August 2022

2022-08-26T21:06:57Z

← Older revision		Revision as of 21:06, 26 August 2022
Line 2:		Line 2:
	*[https://nousimaging.com/solutions/ Product Site]		*[https://nousimaging.com/solutions/ Product Site]
	=Tablet FIRMM=		=Tablet FIRMM=
	'''FIRMM only tracks volume navigator (vNav) T1 and T2 sequences'''		'''FIRMM only tracks bold EPI and volume navigator (vNav) T1 and T2 sequences.'''
	*Register a subject on the scanner (normal procedure).		*Register a subject on the scanner (normal procedure).
	*Open up the windows starts menu (CTRL-ESC).		*Open up the windows starts menu (CTRL-ESC).

Jaredgil at 19:18, 22 August 2022

2022-08-22T19:18:35Z

← Older revision		Revision as of 19:18, 22 August 2022
Line 1:		Line 1:
	~~===~~Framewise Integrated Real-time MRI Monitoring (FIRMM)~~===~~		'''Framewise Integrated Real-time MRI Monitoring (FIRMM)'''
	*[https://nousimaging.com/solutions/ Product Site]		*[https://nousimaging.com/solutions/ Product Site]
	=Tablet FIRMM=		=Tablet FIRMM=
	In-~~Progress~~		'''FIRMM only tracks volume navigator (vNav) T1 and T2 sequences'''
			*Register a subject on the scanner (normal procedure).
			*Open up the windows starts menu (CTRL-ESC).
			*Right click on the 'FIRMM start one patient' towards the top of the menu and click open.
			**A pop-up will appear asking whether this file is secure, select 'Run'.
			*A new pop-up will appear that has a large 'CONNECTED' message.
			*Start your scan and participant motion metrics will appear on the FMRI and T1/T2 tabs (if using vNav structural).

	=Research FIRMM=		=Research FIRMM=

	'''Make sure Advanced User mode is enabled''' - You will know it is if the MARS_SSH shortcut is visible on the start menu		'''Make sure Advanced User mode is enabled''' - You will know it is if the MARS_SSH shortcut is visible on the start menu