Current Designs Response Devices - Revision history

Melodie at 17:52, 31 March 2026

2026-03-31T17:52:46Z

← Older revision		Revision as of 17:52, 31 March 2026
Line 1:		Line 1:
	===Current Designs===		===Current Designs===
	*[https://www.curdes.com Product Site]		*[https://www.curdes.com Product Site]
	*CCN is currently outfitted with ~~three~~ MR safe response devices: [https://www.curdes.com/mainforp/responsedevices/hhsc-1x2-by.html 2 Button Box], [https://www.curdes.com/mainforp/responsedevices/hhsc-1x4-l.html 4 Button Box], and a [https://www.curdes.com/mainforp/responsedevices/hhsc-trk-2.html Track Ball]		*CCN is currently outfitted with four MR safe response devices: [https://www.curdes.com/mainforp/responsedevices/hhsc-1x2-by.html 2 Button Inline Box], [https://www.curdes.com/mainforp/responsedevices/hhsc-1x4-l.html 4 Button Inline Box], [https://www.curdes.com/mainforp/responsedevices/buttonboxes/hhsc-1x4-d.html 4 Button Diamond Box], and a [https://www.curdes.com/mainforp/responsedevices/hhsc-trk-2.html Track Ball]
	*CCN is also equipped with a USB 4 button practice device for use in the testing room outside of the scanner		*CCN is also equipped with a USB 4 button practice device for use in the testing room outside of the scanner
	**This device is '''NOT''' MR safe and should not enter the scanner room at any time		**This device is '''NOT''' MR safe and should not enter the scanner room at any time

Melodie: /* Button Box Not Working */

2022-12-13T22:35:18Z

Button Box Not Working

← Older revision		Revision as of 22:35, 13 December 2022
Line 28:		Line 28:
	**Often what happens is these programs are started before the USB is connected, which doesn't allow the program to register the external device		**Often what happens is these programs are started before the USB is connected, which doesn't allow the program to register the external device
	*If the button box itself appears not to be working (e.g., one button does not push through a response while the others do), there is one 2-button and one 4-button spare in the drawer by the sink, beneath where the thermometer and oxygenation clip are stored.		*If the button box itself appears not to be working (e.g., one button does not push through a response while the others do), there is one 2-button and one 4-button spare in the drawer by the sink, beneath where the thermometer and oxygenation clip are stored.
			**Remember, do NOT bring the demo button box from the testing room into the scanner suite. It is for practice purposes only and NOT MR safe.

	==Trackball Not Working==		==Trackball Not Working==
	In-Progress		In-Progress

Melodie: /* Setup */

2022-12-10T00:26:13Z

Setup

← Older revision		Revision as of 00:26, 10 December 2022
Line 12:		Line 12:
	#Gently find the correct orientation for the two connectors to interlock		#Gently find the correct orientation for the two connectors to interlock
	#*Once the correct orientation is found, connect the button box to the fiber bundle		#*Once the correct orientation is found, connect the button box to the fiber bundle
	#~~Follow~~ the instruction sheet attached to the desk above the silver button box interface in order to select the correct device and settings		#Back in the control room, follow the instruction sheet attached to the desk above the silver button box interface in order to select the correct device and settings
	#*Steps 3 and 5 will be different for the trackball mouse. Choose HHSC-TRK2 and HID TRACK COMP for those steps, respectively.		#*Steps 3 and 5 will be different for the trackball mouse. Choose HHSC-TRK2 and HID TRACK COMP for those steps, respectively.
	#Once settings have been selected, please make sure your subject tests the buttons before continuing		#Once settings have been selected, please make sure your subject tests the buttons before continuing

Melodie: /* Button Box Not Working */

2022-12-10T00:21:53Z

Button Box Not Working

← Older revision		Revision as of 00:21, 10 December 2022
Line 20:		Line 20:
	==Button Box Not Working==		==Button Box Not Working==
	*Check to make sure the bottom row of lights on the button box interface light up when the corresponding buttons are pressed		*Check to make sure the bottom row of lights on the button box interface light up when the corresponding buttons are pressed
	**Left most light corresponds to the left most button (2BB) or the top button (4BB)		**Left-most light corresponds to the left most button (2BB) or the top button (4BB)
	**If all the lights are flashing then the problem is most likely an issue with the connection to your computer		**If all the lights are flashing then the problem is most likely an issue with the connection to your computer
	*Check that the USB indicator on the button box interface is static (not blinking)		*Check that the USB indicator on the button box interface is static (not blinking)
Line 28:		Line 28:
	**Often what happens is these programs are started before the USB is connected, which doesn't allow the program to register the external device		**Often what happens is these programs are started before the USB is connected, which doesn't allow the program to register the external device
	*If the button box itself appears not to be working (e.g., one button does not push through a response while the others do), there is one 2-button and one 4-button spare in the drawer by the sink, beneath where the thermometer and oxygenation clip are stored.		*If the button box itself appears not to be working (e.g., one button does not push through a response while the others do), there is one 2-button and one 4-button spare in the drawer by the sink, beneath where the thermometer and oxygenation clip are stored.

	==Trackball Not Working==		==Trackball Not Working==
	In-Progress		In-Progress

Melodie: /* Device Connection */

2022-12-10T00:21:26Z

Device Connection

← Older revision		Revision as of 00:21, 10 December 2022
Line 8:		Line 8:
	#The three response devices are located in a drawer inside the scanner room labeled "Button Boxes"		#The three response devices are located in a drawer inside the scanner room labeled "Button Boxes"
	#Take one of the devices and remove the small rubber cap located on the connector		#Take one of the devices and remove the small rubber cap located on the connector
	#Remove the top optical bundle from the wall, and remove the rubber ~~cab~~ from the bundle connector		#Remove the top optical bundle from the wall, and remove the rubber cap from the bundle connector
			#* Carefully put the two caps somewhere they won't get lost. The ledge of the window between the scan suite and control room is a good option, because you will see them when you loop the optical cable back up at the end of the scan.
	#Gently find the correct orientation for the two connectors to interlock		#Gently find the correct orientation for the two connectors to interlock
	#*Once the correct orientation is found, connect the button box to the fiber bundle		#*Once the correct orientation is found, connect the button box to the fiber bundle

Melodie at 21:52, 2 September 2022

2022-09-02T21:52:43Z

← Older revision		Revision as of 21:52, 2 September 2022
Line 1:		Line 1:
	===Current Designs===		===Current Designs===
	*[https://www.curdes.com Product Site]		*[https://www.curdes.com Product Site]
	*CCN is currently ~~outfit~~ with three MR safe response devices: [https://www.curdes.com/mainforp/responsedevices/hhsc-1x2-by.html 2 Button Box], [https://www.curdes.com/mainforp/responsedevices/hhsc-1x4-l.html 4 Button Box], and a [https://www.curdes.com/mainforp/responsedevices/hhsc-trk-2.html Track Ball]		*CCN is currently outfitted with three MR safe response devices: [https://www.curdes.com/mainforp/responsedevices/hhsc-1x2-by.html 2 Button Box], [https://www.curdes.com/mainforp/responsedevices/hhsc-1x4-l.html 4 Button Box], and a [https://www.curdes.com/mainforp/responsedevices/hhsc-trk-2.html Track Ball]
	*CCN is also equipped with a USB 4 button practice device for use in the testing room outside of the scanner		*CCN is also equipped with a USB 4 button practice device for use in the testing room outside of the scanner
	**This device is '''NOT''' MR safe and should not enter the scanner room at any time		**This device is '''NOT''' MR safe and should not enter the scanner room at any time
Line 12:		Line 12:
	#*Once the correct orientation is found, connect the button box to the fiber bundle		#*Once the correct orientation is found, connect the button box to the fiber bundle
	#Follow the instruction sheet attached to the desk above the silver button box interface in order to select the correct device and settings		#Follow the instruction sheet attached to the desk above the silver button box interface in order to select the correct device and settings
	#*~~Trackball should~~ be ~~set to~~ HHSC-TRK2		#*Steps 3 and 5 will be different for the trackball mouse. Choose HHSC-TRK2 and HID TRACK COMP for those steps, respectively.
	#Once settings have been selected, please make sure your subject tests the buttons ~~out~~ before continuing		#Once settings have been selected, please make sure your subject tests the buttons before continuing

	=Troubleshooting=		=Troubleshooting=
Line 26:		Line 26:
	*If it works for a txt file but not your stimulus presentation program, keep the USB plugged in and restart your program (Matlab, PsychoPy etc.)		*If it works for a txt file but not your stimulus presentation program, keep the USB plugged in and restart your program (Matlab, PsychoPy etc.)
	**Often what happens is these programs are started before the USB is connected, which doesn't allow the program to register the external device		**Often what happens is these programs are started before the USB is connected, which doesn't allow the program to register the external device
			*If the button box itself appears not to be working (e.g., one button does not push through a response while the others do), there is one 2-button and one 4-button spare in the drawer by the sink, beneath where the thermometer and oxygenation clip are stored.
	==Trackball Not Working==		==Trackball Not Working==
	In-Progress		In-Progress

Jaredgil at 22:13, 11 August 2022

2022-08-11T22:13:26Z

@@ Line 1: / Line 1: @@
 ===Current Designs===
 *[https://www.curdes.com Product Site]
-*CCN is currently outfit with three response devices: [https://www.curdes.com/mainforp/responsedevices/hhsc-1x2-by.html 2 Button Box], [https://www.curdes.com/mainforp/responsedevices/hhsc-1x4-l.html 4 Button Box], and a [https://www.curdes.com/mainforp/responsedevices/hhsc-trk-2.html Track Ball]
+*CCN is currently outfit with three MR safe response devices: [https://www.curdes.com/mainforp/responsedevices/hhsc-1x2-by.html 2 Button Box], [https://www.curdes.com/mainforp/responsedevices/hhsc-1x4-l.html 4 Button Box], and a [https://www.curdes.com/mainforp/responsedevices/hhsc-trk-2.html Track Ball]
 =Setup=
 ==Device Connection==
 =Troubleshooting=
 In-Progress

Jaredgil at 21:50, 11 August 2022

2022-08-11T21:50:55Z

← Older revision		Revision as of 21:50, 11 August 2022
Line 3:		Line 3:
	*CCN is currently outfit with three response devices: [https://www.curdes.com/mainforp/responsedevices/hhsc-1x2-by.html 2 Button Box], [https://www.curdes.com/mainforp/responsedevices/hhsc-1x4-l.html 4 Button Box], and a [https://www.curdes.com/mainforp/responsedevices/hhsc-trk-2.html Track Ball]		*CCN is currently outfit with three response devices: [https://www.curdes.com/mainforp/responsedevices/hhsc-1x2-by.html 2 Button Box], [https://www.curdes.com/mainforp/responsedevices/hhsc-1x4-l.html 4 Button Box], and a [https://www.curdes.com/mainforp/responsedevices/hhsc-trk-2.html Track Ball]
	=Setup=		=Setup=
	~~In-Progress~~		==Device Connection==

	=Troubleshooting=		=Troubleshooting=
	In-Progress		In-Progress

Jaredgil at 21:49, 11 August 2022

2022-08-11T21:49:54Z

← Older revision		Revision as of 21:49, 11 August 2022
Line 1:		Line 1:
			===Current Designs===
	*[https://www.curdes.com Product Site]		*[https://www.curdes.com Product Site]
	*CCN is currently outfit with three response devices: [https://www.curdes.com/mainforp/responsedevices/hhsc-1x2-by.html 2 Button Box], [https://www.curdes.com/mainforp/responsedevices/hhsc-1x4-l.html 4 Button Box], and a [https://www.curdes.com/mainforp/responsedevices/hhsc-trk-2.html Track Ball]		*CCN is currently outfit with three response devices: [https://www.curdes.com/mainforp/responsedevices/hhsc-1x2-by.html 2 Button Box], [https://www.curdes.com/mainforp/responsedevices/hhsc-1x4-l.html 4 Button Box], and a [https://www.curdes.com/mainforp/responsedevices/hhsc-trk-2.html Track Ball]

Jaredgil at 19:37, 4 August 2022

2022-08-04T19:37:05Z

← Older revision		Revision as of 19:37, 4 August 2022
Line 2:		Line 2:
	*CCN is currently outfit with three response devices: [https://www.curdes.com/mainforp/responsedevices/hhsc-1x2-by.html 2 Button Box], [https://www.curdes.com/mainforp/responsedevices/hhsc-1x4-l.html 4 Button Box], and a [https://www.curdes.com/mainforp/responsedevices/hhsc-trk-2.html Track Ball]		*CCN is currently outfit with three response devices: [https://www.curdes.com/mainforp/responsedevices/hhsc-1x2-by.html 2 Button Box], [https://www.curdes.com/mainforp/responsedevices/hhsc-1x4-l.html 4 Button Box], and a [https://www.curdes.com/mainforp/responsedevices/hhsc-trk-2.html Track Ball]
	=Setup=		=Setup=
			In-Progress

	=Troubleshooting=		=Troubleshooting=
			In-Progress